Product Details:
Payment & Shipping Terms:
|
| Wavelength: | 850nm | Distance: | 100M OM4 MM |
|---|---|---|---|
| Transmitter: | 4CH VCSEL Array Laser | Receiver: | 4CH PIN Photo Detector Array |
| TX Output Power: | -8.4~+2.4dBm | RX Sensitivity: | -9.2dBm |
| High Light: | qsfp28 module,data center transceiver |
||
SR4 850nm 100m 100G QSFP28 Transceiver , OM4 Optical Modules For Data Center
Overview
100G QSFP28 SR4 is a parallel 100Gb/s Quad Small Form-factor Pluggable (QSFP28) optical module. It provides increased port density and total system cost savings. The QSFP28 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 25Gb/s operation for an aggregate data rate of 100Gb/s on 100 meters of OM4 multi-mode fiber.
An optical fiber ribbon cable with an MTP/MPO connector can be plugged into the QSFP28 module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel to channel alignment. Electrical connection is achieved through an MSA-compliant 38-pin edge type connector.
Features
4 independent full-duplex channels
Up to 28Gb/s data rate per channel
QSFP28 MSA compliant
Up to 100m OM4 MMF transmission
Operating case temperature: 0 to 70OC
Single 3.3V power supply
Maximum power consumption 3.5W
MTP/MPO optical connector
RoHS-6 compliant
Parameter
| Package (Form Factor) | QSFP28 SR4 |
| Data Rate (typical) | 25.78 Gbps/CH |
| Centre Wavelength | 850nm |
| Distance | 100m on OM4 MMF |
| Diagnostics | Digital Monitor |
| Transmitter | 4CH VCSEL Array Laser |
| Receiver | 4CH PIN photo detector Array |
| TX Output Power (dBm) | -8.4~+2.4 |
| RX Sensitivity (dBm) | -9.2 |
| Low/High Case Temperature | 0°C~70°C |
| Voltage Supply (typical) | 3.3v |
| Connector | MTP/MPO MMF Without PIN |
Application
Rack to Rack
Data Center
Infiniband QDR, DDR and SDR
100G Ethernet
FAQ(Frequently Asked Questions)
1. Can I have a sample order?What is your MOQ?
Yes, we welcome sample order to test and check quality. Mixed samples are acceptable,We do not have MOQ,1 sample is available.
2. What is the lead time?
For usual products,We keep stock,could ship 1~3 days after PO.For big quantity and special products,Please check lead time with our sales.
3. Dose your modules compatible to.(HP/Extreme/Juniper,ect)
Yes,we code the optical transceivers compatible to (HP/Extreme/Juniper).
4. What is your warranty time
We promise 3 years warranty for all products shipped from us.
5. Could I use our own logo and label?
Yes,we could provide a OEM service and make the products with your own label.
6. Could I return the products if there is a quality problem?
Yes,if there is a quality problem happen,including products defects,.we could accept free exchange or return and refund.
Contact Person: sales
Tel: +86-0755-81481986
Fax: 86-755-83612503
